- Messages
- 23
- Reaction score
- 5
- Points
- 3
yay! physics paper 6 2013 wz easier dan 2012 thanks 2 Allah n thank q agn for da notes NOTHING ELSE hepled buh da notes !!
We are currently struggling to cover the operational costs of Xtremepapers, as a result we might have to shut this website down. Please donate if we have helped you and help make a difference in other students' lives!
Click here to Donate Now (View Announcement)
alhamdullaaah , Allaaah helped u no one and nothing else , Alhamdulelaaah incha'allaaah staryay! physics paper 6 2013 wz easier dan 2012 thanks 2 Allah n thank q agn for da notes NOTHING ELSE hepled buh da notes !!
ALhamdullelaaah , congraaaatspaper was hell easy and notes were very helpful...thanks
hey could you please help me out with this......or anyone please...ok so there was the usual balancing a rule experiment Now there was this question where the mass of an unknown load was to be found by placing it on the 90cm mark of a rule (which is pivoted at its 50cm mark) by placing known masses on the other side of the pivot until the rule gets balanced.Then they take measurements from the pivot to the centre of the mass. so there was a part of the question asking what could be a practical difficulty in this experiment. I answered that measuring the distance from the centre of the known mass to the pivot will be difficult since the mass covers the markings on the ruler..so we dont know exactly where its centre of mass is lying.....I know that the load might slip is the most obvious answer but please tell me that whether what i wrote is correct or not.......yay! physics paper 6 2013 wz easier dan 2012 thanks 2 Allah n thank q agn for da notes NOTHING ELSE hepled buh da notes !!
dat is true first thanks *A BIG ONE* 2 Allah Subhan wa taalaa ofcorsalhamdullaaah , Allaaah helped u no one and nothing else , Alhamdulelaaah incha'allaaah star
hmmm i really wish i cud help buddyhey could you please help me out with this......or anyone please...ok so there was the usual balancing a rule experiment Now there was this question where the mass of an unknown load was to be found by placing it on the 90cm mark of a rule (which is pivoted at its 50cm mark) by placing known masses on the other side of the pivot until the rule gets balanced.Then they take measurements from the pivot to the centre of the mass. so there was a part of the question asking what could be a practical difficulty in this experiment. I answered that measuring the distance from the centre of the known mass to the pivot will be difficult since the mass covers the markings on the ruler..so we dont know exactly where its centre of mass is lying.....I know that the load might slip is the most obvious answer but please tell me that whether what i wrote is correct or not.......
You are welcomedat is true first thanks *A BIG ONE* 2 Allah Subhan wa taalaa ofcors
den thank q for da notes
walaikumasslam..Jazakallahukhaira GorgeousEyes.Indeed this is a very helpful post.May allah make ur life very easyAssalamu Alaykum , Here's some notes for you
-You have to record the time taken for one complete oscillation by taking the time for more than one complete oscillation and divide it by their number , and this to reduce error and get more accurate value .
- check if the meter rule in an experiment is vertical by a set square .
- If something directly proportional it should have constant gradient , straight line and begins from the origin .
-To avoid parallax error , your eye should be perpendicular to the reading.
- As the temperature difference between water and room temperature increases , the drop in temperature also increases and vice versa .
-Distance measured between the object and the lens , and between the screen and the lens , must be taken from the center of the lens .
-you need to know the relation between the diameter and the resistance and the area and the resistance of the wire , For example , if diameter increased by 2 times , the resistance will be decreased 4 times , and if the area increased by 2 times , the resistance will be decreased two times .
- Centre of mass
Centre of mass is an imaginary point in a body (object) where the total mass of the
body canbe thought to be concentrated to make calculations easier
To find the centre of gravity on a flat object, use the following steps:
1. Get a flat object.
2. Get a stand and a plumb line (a string with a weight on it).
3. Punch 3 holes in your object.
4. Hang your object from the hole, and attach the plumb line to the same hole.
Draw a vertical line where the plumb line is.
5. Repeat step 4 for all the other holes. Where the lines meet is the centre of gravity.
(FIY the string should be able to swing freely, so should not touch the paper)
For stability the centre of mass must be over the centre of pressure.
DON'T FORGET THE UNITS ! .. It will cost you marks that u are in desperate need for it .
http://g2physics.wikispaces.com/file/view/EXAMINER TIPS FOR IGCSE PHYSICS 0625 (S04).pdf
<-- Examiner tips .
http://www.cambridgestudents.org.uk/subjectpages/physics/igscephysics/Learner Guide for IGCSE Physics 0625.pdf <--- Learner guide .
http://www.docseek.net/ktmhsm/notes-to-study-for-physics-paper-6.html <-- paper 6 notes .
http://hgphysics.files.wordpress.com/2012/11/tips-4-p6-exam.pdf .
http://www.xtremepapers.com/community/threads/atp-preparation.12572/ .
http://www.xtremepapers.com/communi...y-paper-2-2012-discussions.16598/#post-289636 .
https://www.xtremepapers.com/commun...ctical-notes-addendum-to-syllabus-424kb.5257/ .
http://www.xtremepapers.com/community/threads/amazing-notes-for-physics-paper-6.16788/ .
http://salman-olevelnotes.blogspot.ae/p/physics.html .
http://www.igcsephysicstutor.com/index/paper-6-doing-tables-and-graphs.html .
https://www.xtremepapers.com/commun...-tips-experiments-and-feqs.25526/#post-520779 .
https://www.xtremepapers.com/community/threads/physics-practical-videos-for-atp.22625/ .
https://www.xtremepapers.com/community/threads/physics-practical-tips.6306/ .
https://www.xtremepapers.com/community/threads/physics-general-tips.16304/#post-280944.
After studying those tips well , do few past papers ..
Don't panic before exam , this paper is easy . just concentrate and give your brain a chance to think .
anw , That's some notes for now it will be always updated , if you have any notes and tips please post it here , don't ever hesitate . Let us make this post rich and worth reading
Don't forget me and whoever helped u in this post in your prayers
May Allah give u all success in this world .. Good Luck in your studying , and A* in your exam
Like this post If i helped you .
That is completely alright happens to .....almost everyone......in the exam you will be getting an original paper and your readings will be more accurate there...so don't worry.Heey
I know this is quite simple but when the questions usually ask abt length and height, wen I try measuring it by a ruler I dont come with the right answer as in mark scheme.. why? And how shall I do it? :/
Ps I'm private aka homestudies
OmgThat is completely alright happens to .....almost everyone......in the exam you will be getting an original paper and your readings will be more accurate there...so don't worry.
Most welcome.Omg
Thank you very much for a fast reply
Really appreciate it
InshaAllahMost welcome.
Thank you.
Start with Bismillah...Don't forget!
Nope.InshaAllah
Are you preparing for ig this yr?
For almost 10 years, the site XtremePapers has been trying very hard to serve its users.
However, we are now struggling to cover its operational costs due to unforeseen circumstances. If we helped you in any way, kindly contribute and be the part of this effort. No act of kindness, no matter how small, is ever wasted.
Click here to Donate Now