AS Physics P1 MCQs Preparation Thread.

[Sara syed]

explain winter11 paper 11 question5

 

[salvatore]

The uncertainty (accuracy) in this result is 3%
First calculate it: It's 9.8298
U must remmbr that uncertainties are ALWAYS written correct to 1 SF!
So, the above correct to 1 SF is:
10
Uncertainty will be 10 m/s
Also, remmbr that the calculated answer (speed 327.66 u have), is DEPENDENT on the uncertainty.
I mean that the decimal places (or accuracy in this case) of the speed is determined by the uncertainty.
Uncertainty (accuracy - and let's refer them to be the same thing here for now), is 10.
So speed will be correct to 10m/s

ie 330m/s

That is all.
SO:
Find uncertainty first.
Make it correct to 1 sf
Write calculated value correct to the uncertainty.

eg:
X = 34.5444 m
Uncertainty = 0.00498 m
Make uncertainty 1sf = 0.005m
Write X correct to the uncertainty ie 3dp
X = (34.544 +/- 0.005) m

Tadaa

Thanks a lot for the explanation!!

Are you sure that the uncertainty is always written to 1 s.f?? I think I have seen cases where the uncertainty is written to more than 1 s.f

 

[Lyfroker]

Q#9(explain the k.e. part),
13(when we are taking the distance between pivot and the force in calculation, how can 44 be the mark on the rule n not the distance? :S)
15, 24, 27, 31 & 34.
http://papers.xtremepapers.com/CIE/...nd AS Level/Physics (9702)/9702_s11_qp_11.pdf

 

[itallion stallion]

explain winter11 paper 11 question5

find fractional uncertianities in all the values.
Length.oo2/2.043
diameter:2 multiply 0.00002/0.00054
take out for force also.largest is in diameter so it is the answer.remember to take length in one same unit.

 

[Sara syed]

pls explain s10 qp13 question11

 

[AhmedMans]

http://papers.xtremepapers.com/CIE/...nd AS Level/Physics (9702)/9702_s10_qp_11.pdf
No. 27
I don't understand :/

 

[Rahma Abdelrahman]

white rose

 

[Sajeeb Chowdhury]

http://papers.xtremepapers.com/CIE/Cambridge International A and AS Level/Physics (9702)/9702_s10_qp_11.pdf
No. 27
I don't understand :/

the answer is A coz..... E=F/q .... F = 0 coz we dn't know the charge of a positive charge....... and workdone = F x d

 

[Martee100]

This question

 

[hope4thebest]

s12_qp12 questions 14,23,29
Help required

 

[stareaj]

Physic As oct 2010 / 12 mcq 22 and 34
May 2011/12 mcq 15,16,24
Pleasesss

 

[Rrrrrr]

anyone please help them... I really wanted to know the answer :3

 

[Obsidian Fl1ght]

Okay, someone KINDLY tell me everything about stationary waves!
Including the waves formed in open-ended, or closed tubes etc.
I'll be extremely grateful!

 

[salvatore]

I always get confused when solving vector addition/subtraction questions. Could anyone pleaseeee give me a good explanation on how to solve such type of questions?
Here are two examples:

http://papers.xtremepapers.com/CIE/...and AS Level/Physics (9702)/9702_w07_qp_1.pdf
Qn no 3

http://papers.xtremepapers.com/CIE/...nd AS Level/Physics (9702)/9702_w11_qp_11.pdf
Qn no 12

Waiting for your reply..

 

[HorsePower]

http://papers.xtremepapers.com/CIE/...nd AS Level/Physics (9702)/9702_w12_qp_11.pdf
Q 6 , 14 , 36

 

[Obsidian Fl1ght]

Physic As oct 2010 / 12 mcq 22 and 34
May 2011/12 mcq 15,16,24
Pleasesss

22:
Look, k is a measure of the stiffnes of the spring.
So the gr8er the k, the STIFFER the spring.
Likewise, lower the k, the less stiff, or more bendy the spring.

In B, low k (bendier) has a stiffer (high k) spring attached to it.
Imagine. The bendier is being pulled by a stiff, rigid-ish spring WITH a load attached to it!
It's like there are two people hanging by the horizontal pole in a circus.
The one with the weaker limbs is being held onto by the one with stronger ones!
The weaker person will be pulled - A LOT! And may even break a limb!

So just apply this concept to the strings.
In B, too much load on the bendier, weaker spring. It'll break.

In D, for the equal load, both springs will NOT be stretched by same extension.
High k (stiff remmbr?) will be stretched less and weaker (low k) will be more stretched.
The board will be uneven.

Now it's either A or C.

C is illogical. Why would u want to support the stiffer spring or maybe stronger person in the circus? There's no need!

A's the one.
U support the weaker spring so when the heavy load and stiff spring is attached to it, it won't "break a limb".

This was long but I couldn't think of any other way.

 

[stareaj]

Thanks but why not c?

 

[Trash Can]

M/J'12 : Q.4,17,18,20,24,26,29,30,35,37,38
O/N'12 :Q.8,12,13,14,16,17,18,19,22,26,30,31
O/N'11 :1,2,7,9,10,11,12,14,15,17,21,23,26,28,31,33,34,35,38,39
plzzz someone help me..

 

[stareaj]

Somebody please helppppppppp these are my problems don't have any link pls
Physic As oct 2010 / 12 mcq 22 and 34
May 2011/12 mcq 15,16,24
May 2011/ mcq 14,15
Oct2011/13 mcq 17,25
Oct 2011/12 mcq 26
May 2012/12 mcq 5

 

[stareaj]

M/J'12 : Q.4,17,18,20,24,26,29,30,35,37,38
O/N'12 :Q.8,12,13,14,16,17,18,19,22,26,30,31
O/N'11 :1,2,7,9,10,11,12,14,15,17,21,23,26,28,31,33,34,35,38,39
plzzz someone help me..

What varient for oct 2012....